Sharp Rite Band Saw Sharpener Kits
WOODMIZER, LINN LUMBER, HUDSON, TIMBERKING and
NORWOOD BANDSAW BLADE SHARPENERS and SETTERS
Why take the chance of the blade diving by trying to do another cut with a dull blade? Take a few minutes and you will know that you will not be ruining perfectly good wood with a diving blade.
Wood Mizer, HudSon, Timber Wolf, Norwood or Lucas Mill blades can all be easily sharpened, accurately and have you cutting just like a new blade in a few short Minutes.
The Sharp-Rite Band Saw Sharpener by: Work of Art will work with the blades of any make including 1 ¼“, 1 ½” and 2” blades of any length with 7/8” tooth spacing. The Sharp-Rite Band Saw Sharpener will dress the complete surface of each tooth, that is it does not grind away excessively shortening the life of your blade.
Many users are finding that they get over 15 sharpenings per blade saving them time, money and reduces wasted wood. A dull blade can dive and ruin that perfect piece of timber you are working on, instead of trying to see if you can make “One more cut” why not sharpen your blade in mere minutes? A typical 13' blade may be sharpened in about 4 minutes right on your sawmill.
If you look at the purchase blade price and the added cost of sharpening the blades as you do now, only getting 5 sharps per blade if your lucky and the shipping back and forth for the sharpening service, having to drop them off and then waiting to get them back. That sure adds up fast...
A small sawmill operating 8 hours a day 5 days a week would save more than the cost of purchasing the Sharp Rite Band Saw Sharpener in the first month. Every month there after you would save an equal amount that you could put directly into your pocket adding to your bottom line.
ADVANTAGES OF SHARP RITE BANDSAW BLADE SHARPENER
- Sharpens your blade ON the sawmill, in 3-4 minutes.
- Portable, light-weight and easy to use
- Tooth profile stays consistent, allowing you to take the smallest amount of material from the blade each sharpening.
- Blades will cut more wood, with less tooth setting times.
- Tool has 7' leads with battery clips to use your 12 volt battery supply.
- Kit includes sharpener, sharpening wheels, dressing brick and instructional videos.
WOODMIZER, HUDSON, LUCAS and NORWOOD BANDSAW BLADE SETTER
The Sharp-Rite Blade Setter is used right on the sawmill just like the Band Saw Sharpener is. Our users find that setting need only be done about every 5th sharpening. The Sharp Rite Blade Setter sets 3 teeth at a time, one left, one right and it leaves the third straight.
Slide the Sharp Rite Blade Setter 3 teeth up the blade and with the squeeze of the handle another three teeth are already set. In under 5 minutes the blade is set and ready to go as it was intended to when it was shipped to you in the first place.
For more information:
Due to manufacturing issues the product is no longer being manufactured or sold and there is no time line for when a solution will be found.